Installing AQ
Before installing AQ, I would like to assure everyone that AQ software will not harm your computer nor spread any computer virus, worm, time bomb, logic bomb, or other such computer program, and most importantly AQ will not access any information stored in your computer other than specified during the installation of AQ.
To start installing AQ:
1- Extract the downloaded zip file SetupAccessQuran.zip to the setup package Setup Access Quran.exe
2- Double click Setup Access Quran.exe to extract the setup package and start AQ setup program as seen below:
Thumbnail, click to enlarge.
3- Click <Next> to move to next window seen below:
Thumbnail, click to enlarge.
4- Scroll down to finish reading the Readme file as seen below:
Thumbnail, click to enlarge.
5- Click <Next> to move to next window seen below:
Thumbnail, click to enlarge.
6- Scroll down to finish reading the END-USER LICENCE AGREEMENT as seen below:
Thumbnail, click to enlarge.
7- You must accept the terms of the Licence Agreement to proceed with the installation; the next window appears as seen below:
Thumbnail, click to enlarge.
8- You should not change the setup type, press <Next> to continue as seen below :
Thumbnail, click to enlarge.
9- It is up to you to make AQ available for everybody uses your computer or only for you, press <Next> to continue to next screen seen below:
Thumbnail, click to enlarge.
10- You may only change the above default application folder from Drive C if there is not enough disk space available for AQ, AQ needs a minimum of 900 MB of disk space, this due to the fact the the high quality MP3 files total size alone is almost 700 MB, the other 200 MB needed to run AQ. AQ setup on the other hand will installs AQ with as little as 100 MB of free disk space, this is due to the fact AQ setup does not distribute the MP3 files, the MP3 files will be downloaded as needed while you are using AQ, however it your responsibility to install AQ on a drive that should accommodate the MP3 files you will be downloading. Let?¢??s assume that we will install AQ on ?¢??C:\Access Quran\?¢?? as seen above. Press <Next> to move to next screen seen below:
Last edited by AhmedBahgat on Fri 23 Dec, 2011 5:52 am; edited 2 times in total
Posted:
Fri 23 Dec, 2011 4:55 am
Thankful People
Thanks AhmedBahgat for his/her post
AhmedBahgat Site Admin
Status: Age: 59 Faith: Islam Gender:
Zodiac: Joined: Oct 16, 2006
Posts: 3236 Location: Australia
Post subject:
11- The above screen will appear under Windows Vista, Windows 2008 and Windows 7, while the screen seen below will appear instead under Windows XP and Windows 2003:
Thumbnail, click to enlarge.
12- Select the shortcuts your desire then press <Next> to move to next screen seen below:
Thumbnail, click to enlarge.
13- Specify the Start Menu Shortcuts Folder then press <Next> to move to next screen seen below:
Thumbnail, click to enlarge.
14- By clicking on <Install> AQ setup will check for the availability of Access 2003 on your machine, if it is installed, AQ setup will jump to step AA, but if Access 2003 is not installed on your machine, AQ setup will prompt you to install Access 2003 runtime files as seen below:
c- It writes the shortcut specification to the batch file ?¢??AQ.bat?¢?? in order to start ?¢??AccessQuran.mde?¢?? using Access 2003 runtime files.
Because the ?¢??Security.mde?¢?? script runs under the Command Prompt, the Command Prompt windows should open momentarily above AQ setup window as seen below:
Thumbnail, click to enlarge.
19: When the above command is executed, ?¢??Security.mde?¢?? will call Access 2003 runtime executable ?¢??MSACCESS.EXE?¢?? which in return may display a series of warning messages depending on your machine status as explained below:
a- If you have no Access installed at all prior to installing AQ, then two warning message will be displayed, the first one seen below:
For the above first message, you must answer <NO>, but for the second message which is similar to the one seen below:
You must answer <OPEN>
b- If you have an older Access version than Access 2003 installed prior to installing AQ, then the same two messages seen above will be displayed.
c- If you have Access 2003 installed prior to installing AQ and your Access 2003 Macro Security setting is set to higher than low, then you will receive the same two message seen above.
d- If you have Access 2003 installed prior to installing AQ and your Access 2003 Macro Security setting is set to low, then you will NOT receive the above two message at all.
e- If you have newer Access than Access 2003 installed prior to installing AQ and your Access 2003 Macro Security setting is set to higher thanlow, then you will receive three messages as seen below.
For the above first message, you must answer <NO>, but for the second message which is similar to the one seen below:
Thumbnail, click to enlarge.
You must answer <YES>, and for the third and final message seen below:
You must answer <OPEN>
NOTE: ?¢??Security.mde?¢?? script main and only purpose is to stop these annoying messages from appearing again, therefore whenever you start AQ you will never see these messages again
20- After all the above is done, you should see the final window confirming the success of AQ installation with the option to start AQ as seen below:
Status: Age: 59 Faith: Islam Gender:
Zodiac: Joined: Oct 16, 2006
Posts: 3236 Location: Australia
Post subject:
21- Click <FINISH> to finalize AQ installation. At the end of a successful installation of AQ, you should have shortcut to AQ on your Desktop as seen below:
22- You should also have Access Quran programs group under the Start Menu programs as seen below under Windows 7:
Thumbnail, click to enlarge.
23- Opening AQ programs folder should reveal the 3 shortcuts installed as seen below:
Thumbnail, click to enlarge.
24- You may uninstall AQ using the shortcut seen above, or uninstall AQ from Add/Remove Programs under Windows Control Panel OR through the installed Programs and Features as seen below for Windows 7 users:
Thumbnail, click to enlarge.
25- Selecting Access Quean then pressing uninstall above should start AQ setup program to remove Access Quran as seen below
Last edited by AhmedBahgat on Fri 23 Dec, 2011 6:48 pm; edited 1 time in total
Posted:
Fri 23 Dec, 2011 5:40 am
AhmedBahgat Site Admin
Status: Age: 59 Faith: Islam Gender:
Zodiac: Joined: Oct 16, 2006
Posts: 3236 Location: Australia
Post subject:
26- AQ setup program to remove Access Quran does not remove Access 2003 runtime files, therefore if you want to remove it, you need to repeat the process above for Access 2003 runtime as seen below:
Thumbnail, click to enlarge.
27- Selecting Microsoft Office Access 2003 Runtime then pressing Uninstall, should start the windows installer to remove it as seen below:
Thumbnail, click to enlarge.
28- Clicking <YES> above should remove Access 2003 Runtime as seen below:
Thumbnail, click to enlarge.
29- Below is AQ folders and files structure created by AQ setup program
Thumbnail, click to enlarge.
30- Descriptions of files and folders created by AQ setup program
ArabicPad
Folder
Keeps files needed for Arabic Note Pad
DownloadFolder
New versions of AQ will be downloaded here for processing
ImagesFolder
Has 114 sub-folders, each sub-folder keeps the Uthmany images of each Verse in each Sura
LatestVersion
Folder
Keeps the file which stores the information required by AQ to connect to http://access-quran.com to check for new updates
MP3
Folder
Keeps 115 MP3 audio files, all downloaded MP3 files will be stored here
OldVersions
Folder
AQ old versions will be archived here
Splash
Folder
Keeps a few image files needed for AQ
System64Folder
Folder
Keeps the ActiveX files required under 64bit systems
AccessQuran.mde
File
Main AQ application (Frontend)
Aq.bat
File
Batch file to start AQ using Access 2003 Runtime, the command line inside this batch file will be composed by Security.mde during AQ setup
Aq.ico
File
Icon file used for AQ shortcut
AQBend.mde
File
Main AQ data (Backend)
Aqus.exe
File
User Manual file
EULA.rtf
File
End User Licence Agreement used by AQ setup program
Inst.ico
File
An icon file used by one of the shortcuts
Osk.exe
File
Microsoft On-screen Keyboard
Readme.rtf
File
Readme file used by AQ setup program
Security.bat
File
Access 2003 program that is executed by AQ setup program to set Access 2003 Macro Security setting to ?¢??Low?¢?? then writes the command to start AQ into Aq.bat
Unzip32.dll
File
Unzipping library file used by Upgrade.mde to unzip downloaded files
Upgrade.mde
File
The upgrade utility used by AQ whenever there is new updates
Url.ico
File
Icon file used by AQ
Zip32.dll
File
Zipping library file, not used at the moment _________________ http://free-islam.com
Posted:
Fri 23 Dec, 2011 5:41 am
AhmedBahgat Site Admin
Status: Age: 59 Faith: Islam Gender:
Zodiac: Joined: Oct 16, 2006
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
All times are GMT + 10 Hours Ported for PHP-Nuke by nukemods.com
